Tankless Vs Hot Water Tanks

For many years it was just about taken for granted that if you owned a home you owned some type of water heater that had a storage reservoir as a part of it. This was true regardless of the type of heating system that you had in your home. These days all that is changing because now there is such a thing as tankless water heaters which really supply an abundance of conveniences to those that own them. Now there is a debate among homeowners as to which of these types of water heaters is the ideal one to have. Here is a comparison of tankless vs hot water tanks.

First of all it must be noted that not just anybody can go out and purchase a tankless water heater and have it installed at their home. These water heaters require a specific type of system that they must be installed on in order to work. They can only be installed on forced air furnaces that burn natural gas, liquid propane or oil. This is because these are the only types of fuel that burn hot enough to instantly heat water up to the 120 degree temperature that most sources say is the ideal standard temperature for hot water out of the tap in a home.

Ok now on with the comparison of tankless vs hot water tanks:

Water Heaters with Tanks

These are oldies but goodies and a large majority of them use electricity as their heat source. Cold water passes over a heating element slowly to get warmed up and then this hot water is stored in the tank until called on for use. They typically hold about 40 gallons of water and this does get replenished as used but it happens very slowly. These will typically last about 10 years with proper maintenance and are fairly inexpensive to get replaced.

Tankless Water Heaters

These units have to be compatible with the type of forced air furnace you have in your house. Their initial cost to install is much higher than a water heater with a tank. The best thing about them is that you get an unlimited supply of hot water with them unlike water heaters with tanks that sometimes leave the last family members to get up taking cold showers. They also are very economical to run because they heat water extremely efficiently and they do not have to constantly reheat stored water like conventional water heaters with tanks do. They do require periodic maintenance to keep them in proper working order but they should last well over 15 years if that is done.

Of course the most important thing is that you have access to hot water in your home in the first place and both of these systems do a nice job at that. As far as the question of tankless vs hot water tanks goes a lot of that comes down to personal preference. You have to weigh out convenience, price, cost of the heat source and the other factors discussed in order to make a sound buying decision on which one to purchase.

Posted in Blog | Comments closed

How to Unplug a Drain

There are most likely a large number of drains in your home, apartment or condo. They take the bath and shower water away that you use and also take away the water from every time you use your sinks too. You have drains for your washing machine and of course let’s not forget the all-important toilet drains too. There are few guarantees in life but one of them is if you have drains in your home one or more of them will get plugged up at some time. Here are some steps http://www.plumbers-edmonton.ca/ on how to unplug a drain that has become clogged in your home.

Use a Plunger
The very first step in learning how to unplug a drain is by getting out that old and faithful magical plumbing tool the ‘plunger’. These are as essential to have in your home as toilet paper is. There is nothing worse than having a toilet you can’t use or a backed up kitchen sink drain and this handy plumbing tool can get a majority of clogs out on its own. When using one make sure the rubber end completely covers the drain opening so all the force of air when plunging goes into the drain line.

Drain Unclogging Liquid
If the plunger does not work don’t panic and call your local plumbing professional just yet. There are a few more things you can try on your own first before taking that step. One of them is pouring drain cleaner into the drain to try and chemically work out that stubborn clog. You can buy the expensive and harsh drain cleaning chemicals at the store or you can make your own effective and environmentally friendly drain cleaner. A simple mix of household vinegar and baking soda will often do wonders when left sitting in a drain overnight. It will also help clean the drain line and rid it of smells too. Make sure to run hot water for several minutes into the drain in the morning if the clog indeed came out.

Snake the Drain
If drain cleaner fails to do the trick then next it’s time to try something with a little more raw power such as a drain snake. These come in various forms and if you do not own something like a simple toilet snake then you can rent a drill snake pretty inexpensively at your local home improvement center in most cases. A drill snake has power but is not so heavy and it’s simpler to use than bigger drain snakes; perfect for the non-professional. All you have to do is feed the snake line slowly into the clogged drain line until you feel the clog. Once at the clog turn the drill on and let it naturally work its way through the clog; do not force it. Be sure not to scratch any of the surfaces around the drain opening with the snake.

By now the water in your sink, toilet or other drain should be flowing smoothly because you now know how to unplug a drain. If your drain is still plugged up at this point it’s now time to call in a professional plumber to get that stubborn clog out for you.

Posted in Blog | Comments closed

How to Cope With Plumbing Emergencies

With all of the plumbing that is found throughout your home it is no wonder that you would have a problem with it from time to time. Events such as clogged up drains and sudden leaks springing up are going to happen at some point no matter how good of shape your plumbing is in. When these things happen it can be especially worrisome if the plumbing problem involves a large amount of water and the potential for damage. In the event of a big water problem here are some tips on how to cope with plumbing emergencies.

‘DON’T PANIC’
This is the very important first step in learning how to cope with plumbing emergencies and it’s a big one. It’s also not easy to do if something like your water heater has cracked and is flooding out your first floor or your washing machine hose has split and your basement is flooding. The importance of staying in control cannot be underestimated in plumbing emergency situations. You are about to have to make some very fast and important decisions and if you make the wrong ones it could cost you precious minutes that can result in thousands of dollars’ worth of damage.

Stop the Flow of Water
Many people think that calling in a plumbing 911 here is the next step but that could not be more wrong. This is a plumbing emergency not a life in danger. The most important thing is to stop the water flow to any leak source or backed up drain. Many water sources have shutoffs near them and going outside and shutting of the incoming water line to the house is never a bad option. Once you have the water flow stopped the situation becomes more manageable and further damage is limited.

Damage Control
Move furniture, clothes, rugs and anything else that has not gotten wet yet from flooded rooms or from under dripping ceilings. Plumbing emergencies are bad but the damage can be limited to some extent.

Call an Emergency Plumbing Professional
Once you have stopped the flow of water and prevented further damage then it is time to call an emergency plumber. Fortunately there are many reputable plumbing companies that offer these types of services and they are well equipped to handle just about any emergency plumbing situation.

Clean up ASAP
The longer water sits on floors, carpets, rugs and other household items the more damage it will do. It is essential to get a wet/dry vac, rented carpet shampooer or mop on the job right away to pick up as much water as possible. Also wash any clothes, upholstery or anything else that has become contaminated with water as soon as possible. After the cleanup do whatever it takes to inhibit mold and mildew growth which can cause even more damage.

Plumbing emergencies are always a tense and nerve wracking event where seconds count and the potential for poor decisions abounds. If you keep a cool head and follow the advice here on how to cope with plumbing emergencies you will manage the situation as efficiently as possible and get through it.

Posted in Blog | Comments closed

Why You Should Never Put Off Plumbing Repairs

There are a lot of reasons why you should never put off plumbing repairs; however, life can get in the way at times. Maybe you do not have the money to call a professional, or you are unable to find the time to do the repairs on your own. With a lot of demands on time, it can also be easy to simply forget about that leaking faucet and other issues that can arise. The more that you neglect minor repairs, you could be putting yourself at serious risk of the issue becoming a lot larger and more expensive to handle down the road. These are some of the top reasons why you should never put off plumbing repairs: http://air-conditioning-edmonton.ca.

Deferred Maintenance and the Long-Term Costs

While a few droplets of water will not be a big deal, delayed maintenance can end up coming back to haunt you in countless ways. If you happen to have a leak in your supply line or faucet, you are going to end up paying for all of the wasted water. Even a single leak can translate to 10,000 gallons of water or more each year that is lost. This can bring up your water bill quite a bit.

In addition to the waste and cost, leaking can cause other issues. Whenever there is a leak outside of your toilet, sink or tub, that moisture can turn into mold and mildew or even work on rotting your home’s woodwork. You never want to put yourself in a position where you have to rip out your wall, floor or ceiling simply because you put off an easy plumbing repair.

Your Plumber Can Protect Your Health

Plumbing problems can go a lot further than just your pocketbook. The mold and mildew that can develop will actually promote respiratory issues and the biofilm that can build up in your pipes can lead to noxious diseases. There could also be a backed up sewer line or a leak around the toilet seal that could end up exposing you and your family to raw sewage on the inside of your home.

When you stop to think about all of the possible issues that can arise from ignoring a simple plumbing repair job, you are sure to find that it is best to break down and address it as soon as possible. You can either address the issue on your own with your own tools or you can spend the money on having a professional plumber come out to your location. You really have to weigh your options, being the cost of a plumber go come out or waiting until there is a much bigger emergency that is going to have a hefty price tag.

An Experienced Hand for Your Plumbing Is Best

When you have plumbing problems, you need to take action and call the plumbing professionals. They will be able to take a peek at the problem and work on getting it fixed right away.

Posted in Blog | Comments closed

Combat Low Water Pressure by Using a Pressure Tank

There is nothing more frustrating than getting into the shower and only have a slow trickle of water coming out of the shower head and barely sprinkling you. At times, addressing this problem is straightforward and simple. However, low water pressure can be caused by several different things, including some municipal problems that are outside of your control. Keep reading to learn how a pump and pressure tank can help you with being able to enjoy your shower even when the city water supply is not fully up to speed.

Diagnose and Confirm Problems Your Pipes Are Having

Usually low water pressure isn’t a real pressing problem, especially compared to high water pressure, which may place stress on your whole household plumbing system and damage your fixtures. Low pressure, however, can still be annoying. It can translate into annoying whistling noises coming out of your pipes, appliances not working the way they should, and having to take unsatisfying showers.

If you are concerned that the water pressure in your home is too low, you can buy a testing kit so that your suspicions can be confirmed. You will need to take action if it is below 30 PSI. Identifying the cause of your low water pressure problem is the first step you need to take to tackle it. If there is debris buildup someplace in your pipes or there is a plumbing leak, then you should definitely hire a plumber to have the issue fixed. However if the low water pressure source is outside your house like weak municipal water supply or low-pressure well, there is an additional step that you can take to help remedy the situation.

Use Tanks & Pumps To Keep Your Water Flowing

Just remember that integrating a pump and pressure tank into your home’s plumbing is a fairly complicated job. It is definitely something you shouldn’t try to do on your own unless you have a fair amount of of DIY experience under your belt. Pressure tanks are used more commonly for complementing well systems. However, they can also be very helpful for houses with municipal lines also. A pressure tank by itself, integrated into the plumbing right after the main shut off valve, can help to keep a high volume of water in your system, and maintain a more constant level of pressure.

In order to boost your pressure even more, you will need to have a pump in addition to the tank. What the pump does is take low-pressure water that is flowing into your house and increase its PSI before it is sent to the pressure tank. The pump has a one-way valve that prevents the back up of pressurized water and having it returned back into the water supply. A majority of pumps have settings for allowing you to control PSI according to your specifications as well.

Assistance for Your Water Pressure Problems Is Just One Phone Call Away

If your household plumbing has low water pressure, a qualified plumber can diagnose the problem for you and inform you of what your options are. Give your local plumbing professional a call today so that you can take that important first step towards being able to take a more satisfying shower.

Posted in Blog | Comments closed

A Few Signs Your Water Heater Might Be Failing

A water heater is one of the most important elements of a plumbing system. You wouldn’t have any hot water without it and wouldn’t be able to use your washing machine and your dishwasher either. You need to make sure your water heater is in good working order, especially during the winter months.

You can avoid finding yourself without a working water heater by simply monitoring it. There are a few signs that usually indicate that your water heater needs to be maintained or that a small repair is needed. Some signs also mean that you are going to need a new water heater soon http://www.furnace-repair-edmonton.ca.

Learn To Recognize the Signs of a Failing Water Heater

Water heaters do not last forever. These appliances go through a lot of wear and tear during the winter, especially if your basement is not heated. The changes in temperature cause the metal tank of your water heater to expand and to contract, which can lead to some damage. If your water supply contains a lot of minerals, your water heater might need to be maintained on a more regular basis.

Look for these signs and have a professional perform a hot water heater tune-up if you notice any of them:

  • A leak, drip or a small puddle of water around your hot water heater.
  • The flame should be blue and not yellow if you have a gas water heater.
  • The temperature in your shower is not the same as the temperature you set the thermostat to.
  • There is rusty water coming from the faucets.
  • Any cracks or bending in the water heater tank itself.

Fixing or Replacing Your Water Heater

You might be able to fix your water heater by yourself if you are comfortable when it comes to working on appliances. You can for instance replace a heat unit or another part by yourself. However, replacing your water heater or fixing a more complex part is something you should hire a professional for.

Replacing a hot water heater tends to be expensive. However, getting a brand new water heater will actually help you save a lot of money on your bills since federal regulations dictate that newer water heaters should be more efficient than old models. You should see a real difference on your energy bills once a new water heater is installed. You need to assess your needs so that you can choose the perfect hot water heater in function of how much hot water your family needs.

Rely On an Expert To Maintain Your Water Heater

If you need to replace your old water heater, need to have a few repairs made or simply would like to have a tune-up done, you should get in touch with a professional plumber.

Posted in Blog | Comments closed